Car Performance Specs

Short Description
This service manual has been prepared to provide SUBARU service personnel with the necessary information and data for the correct maintenance and repair of SUBARU vehicles. This manual includes the procedures for maintenance, disassembling, reassembling, inspection and adjustment of components and diagnostics for guidance of experienced mechanics. Please peruse and utilize this manual fully to ensure complete repair work for satisfying our customers by keeping their vehicle in optimum condition. When replacement of parts during repair work is needed, be sure to use SUBARU genuine parts.


Content
1. Basic Diagnostics Procedure
2. Working Precautions
3. Super Multiple Junction (SMJ)
4. Power Supply Routing
5. Ground Distribution
6. Airbag System
7. Air Conditioning System
8. Anti-lock Brake System
9. A/T Control System
10. Audio System
11. Charging System
12. Combination Meter
13. Cruise Control System
14. Door Lock System
15. Engine Coolant Temperature Gauge System
16. Engine Electrical System
17. Fuel Gauge System
18. Full-Time Dual-Range System
19. Front Accessory Power Supply System
20. Headlight Beam Leveler System
21. Horn System
22. Immobilizer System
23. Keyless Entry System
24. Back-up Light System
25. Clearance Light and Illumination Light System
26. Front Fog Light System
27. Headlight System
28. In Compartment Light System
29. Stop Light System
30. Turn Signal Light and Hazard Light System
31. Oil Pressure Warning Light System
32. Outside Temperature Display System
33. Parking Brake and Brake Fluid Level Warning System
34. Pneumatic (Air) Suspension System
35. Power Seat System
36. Power Window System
37. Radiator Fan System
38. Rear Accessory Power Supply System
39. Rear Fog Light System
40. Rear Window Defogger System
41. Remote Controlled Rearview Mirror System
42. Seat Belt Warning System
43. Seat Heater System
44. Starter System
45. Sunroof System
46. Vehicle Dynamic Control System
47. Wiper and Washer System (Front)
48. Wiper and Washer System (Rear)
49. Wiper Deicer System
50. Overall Systems
51. Front Wiring Harness
52. Bulkhead Wiring Harness (In Engine Room)
53. Bulkhead Wiring Harness (In Compartment)
54. Engine Wiring Harness and Transmission Cord
55. Instrument Panel Wiring Harness
56. Rear Wiring Harness
57. Door Cord
58. Rear Wiring Harness and Trunk Lid Cord
59. Rear Wiring Harness and Rear Gate Cord
Get the file Download here

1. Put the key into the ignition and turn the vehicle to the on position but dont start the engine.
2. Find the diagnostic port under the drivers side dashboard near the pedals. Plug the computerized scan tool into this port. The battery from the vehicle will automatically power on the tool.
3. Find arrows on the faceplate of the scan tool and use them to scroll through the menu until you find the Read All Codes command. Select this command.
4. Scroll through the menu again and find Clear All Codes. Select this option then wait for the service engine light to shut off.
5. Turn off the vehicle and wait five minutes. Start the engine and verify that the check engine light is still off.

1. Locate the trip-meter knob in the lower center of the gauge cluster. The knob is black and you use it to reset your mileage on your tip-meter.
2. Push inward on the knob until the service interval light starts to flash. This generally takes about 10 seconds.
3. Let the knob out, and then tap it in one time quickly to turn off the light.